Next: Copying This Manual, Previous: Bug reporting, Up: Top [Contents][Index]
HOSTPROC-MIB DEFINITIONS ::= BEGIN
-- *************************************************************
--
-- Host processes MIB
--
-- *************************************************************
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, enterprises, Integer32, Gauge32,
TimeTicks
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, DisplayString, TimeStamp, DateAndTime, TruthValue
FROM SNMPv2-TC;
hostprocMIB MODULE-IDENTITY
LAST-UPDATED "202010091559Z"
ORGANIZATION "Gray Software"
CONTACT-INFO "Sergey Poznyakoff <gray@gnu.org>"
DESCRIPTION
"This MIB module defines objects for detailed host
processes statistics."
REVISION "202010091559Z"
DESCRIPTION
"First release."
::= { enterprises 9163 104 }
hostprocManagement OBJECT IDENTIFIER ::= { hostprocMIB 1 }
hostprocUpTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total uptime of the Hostproc SNMP agent."
::= { hostprocManagement 1 }
processGroupModify OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1024))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"String which when set, registers new group."
::= { hostprocManagement 2 }
ProcessEntry ::= SEQUENCE {
processIndex Integer32,
processPID Integer32,
processPPID Integer32,
processUID Integer32,
processGID Integer32,
processCPUAvg Gauge32,
processCPUInst Gauge32,
processTime TimeTicks,
processState DisplayString,
processNice Integer32,
processPriority Integer32,
processVSZ Gauge32,
processRSS Gauge32,
processComm DisplayString,
processCmdline DisplayString,
processExe DisplayString
}
processTable OBJECT-TYPE
SYNTAX SEQUENCE OF ProcessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Process table."
::= { hostprocMIB 2 }
processEntry OBJECT-TYPE
SYNTAX ProcessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) describing a process."
INDEX { processIndex }
::= { processTable 1 }
processIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying each proc."
::= { processEntry 1 }
processPID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PID of the process."
::= { processEntry 2 }
processPPID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PID of the process parent."
::= { processEntry 3 }
processUID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Real UID of the process."
::= { processEntry 4 }
processGID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Real GID of the process."
::= { processEntry 5 }
processCPUAvg OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average CPU usage (percent)."
::= { processEntry 6 }
processCPUInst OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Instantaneous CPU usage (percent)."
::= { processEntry 7 }
processTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amount of time this process has been scheduled."
::= { processEntry 8 }
processState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"State of the process."
::= { processEntry 9 }
processNice OBJECT-TYPE
SYNTAX Integer32 (-20 .. 20)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The nice value of the process."
::= { processEntry 10 }
processPriority OBJECT-TYPE
SYNTAX Integer32 (-100 .. 20)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For processes running a real-time scheduling policy,
this is the negated scheduling priority, minus one;
that is, a number in the range -2 to -100,
corresponding to real-time priorities 1 to 99.
For processes running under a non-real-time
scheduling policy, this is the raw nice value as
represented in the kernel (in the range -20 to 19."
::= { processEntry 11 }
processVSZ OBJECT-TYPE
SYNTAX Gauge32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Virtual memory size in bytes."
::= { processEntry 12 }
processRSS OBJECT-TYPE
SYNTAX Gauge32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Resident Set Size: the non-swapped physical memory
that the process uses (in kiloBytes)."
::= { processEntry 13 }
processComm OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The filename of the executable (argv[0])."
::= { processEntry 14 }
processCmdline OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Full command line of the process."
::= { processEntry 15 }
processExe OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual file name of the executable."
::= { processEntry 16 }
ProcessMatchField ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The field of ProcessEntry used for grouping."
SYNTAX INTEGER { ProcessComm(0), ProcessExe(1), ProcessCmdline(2) }
ProcessMatchType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Type of pattern matching."
SYNTAX INTEGER { exact(0), basename(1), regexp(2) }
ProcessGroupEntry ::= SEQUENCE {
processGroupIndex Integer32,
processGroupName DisplayString,
processGroupPattern DisplayString,
processGroupField ProcessMatchField,
processGroupMatch ProcessMatchType,
processGroupOK TruthValue
processGroupMinCount Integer32,
processGroupMaxCount Integer32,
processGroupMaxVSZ Gauge32,
processGroupMaxRSS Gauge32,
processGroupMaxCPU Gauge32,
processGroupCount Integer32,
processGroupCPUMax Gauge32,
processGroupCPUAvg Gauge32,
processGroupCPUInst Gauge32,
processGroupVSZ Gauge32,
processGroupRSS Gauge32,
}
processGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF ProcessGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Process group aggregates data from several processes.
The processes are grouped by their name (either
executable or argv[0]) or by entire command line,
which is matched against processGroupPattern. Exact,
extended regular expression, or basename matching can
be used."
::= { hostprocMIB 3 }
processGroupEntry OBJECT-TYPE
SYNTAX ProcessGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) describing a process group."
INDEX { processGroupIndex }
::= { processGroupTable 1 }
processGroupIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying each entry in the group
table."
::= { processGroupEntry 1 }
processGroupName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of this process group."
::= { processGroupEntry 2 }
processGroupPattern OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Pattern used to select processes for this group."
::= { processGroupEntry 3 }
processGroupField OBJECT-TYPE
SYNTAX ProcessMatchField
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ProcessEntry field used for grouping."
::= { processGroupEntry 4 }
processGroupMatch OBJECT-TYPE
SYNTAX ProcessMatchType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Pattern matching type. Either exact or extended
regular expression matching can be requested.
Unless entire command line is matched, the basename
matching is also allowed. This matching extracts the
base file name from both pattern and the selected
field and compares them."
::= { processGroupEntry 5 }
processGroupOK OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A flag indicating status of the group. It is true(1)
when the number of processes and the total amount of
resources used by them is within the configured
range and false(2) otherwise."
::= { processGroupEntry 6 }
processGroupMinCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum number of processes that should be
running in this group. The OK flag is cleared if the
number of running processes falls below this minimum."
::= { processGroupEntry 7 }
processGroupMaxCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of processes that should be
running in this group. Zero or negative number
stands for infinity. The OK flag is cleared if the number
of running processes becomes greater than the maximum."
::= { processGroupEntry 8 }
processGroupMaxVSZ OBJECT-TYPE
SYNTAX Gauge32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum total value of the virtual memory size
used by processes in this group. The OK flag is
cleared if the total VSZ becomes greater than this value."
::= { processGroupEntry 9 }
processGroupMaxRSS OBJECT-TYPE
SYNTAX Gauge32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum total value of the RSS for use by
this group. The OK flag is cleared if the actual
total RSS becomes greater than this value."
::= { processGroupEntry 10 }
processGroupMaxCPU OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value of instantaneous CPU usage (in
percent) allowed for this group. The OK flag is
cleared if the actual usage becomes greater than
this value."
::= { processGroupEntry 11 }
processGroupCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of the running processes in this group."
::= { processGroupEntry 12 }
processGroupCPUMax OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum instantaneous CPU usage (percent)."
::= { processGroupEntry 13 }
processGroupCPUAvg OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average total CPU usage (percent)."
::= { processGroupEntry 14 }
processGroupCPUInst OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average instantaneous CPU usage (percent)."
::= { processGroupEntry 15 }
processGroupVSZ OBJECT-TYPE
SYNTAX Gauge32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total virtual memory size in bytes."
::= { processGroupEntry 16 }
processGroupRSS OBJECT-TYPE
SYNTAX Gauge32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Resident Set Size: the non-swapped physical memory
that is in use by the processes in this group."
::= { processGroupEntry 17 }
ProcessExcludedEntry ::= SEQUENCE {
processExcludedIndex Integer32,
processExcludedName DisplayString,
processExcludedPattern DisplayString,
processExcludedField ProcessMatchField,
processExcludedMatch ProcessMatchType,
processExcludedOK TruthValue
processExcludedMinCount Integer32,
processExcludedMaxCount Integer32,
processExcludedMaxVSZ Gauge32,
processExcludedMaxRSS Gauge32,
processExcludedMaxCPU Gauge32,
processExcludedCount Integer32,
processExcludedCPUMax Gauge32,
processExcludedCPUAvg Gauge32,
processExcludedCPUInst Gauge32,
processExcludedVSZ Gauge32,
processExcludedRSS Gauge32,
}
processExcludedTable OBJECT-TYPE
SYNTAX SEQUENCE OF ProcessExcludedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Exclusion group defines processes that descend from a
common ancestor or from a set of common ancestors.
Such processes are excluded from both the processTable
and the processGroupTable. Their total statistics
is preserved in this table.
The set of common ancestors is composed from the
processes that match the processExcludedPattern.
The matching algorithm is the same as used in the
processGroupTable."
::= { hostprocMIB 4 }
processExcludedEntry OBJECT-TYPE
SYNTAX ProcessExcludedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) describing a group of
excluded processes."
INDEX { processExcludedIndex }
::= { processExcludedTable 1 }
processExcludedIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying each entry in the
exclusion table."
::= { processExcludedEntry 1 }
processExcludedName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the entry identifies the exclusion group."
::= { processExcludedEntry 2 }
processExcludedPattern OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Pattern used to select ancestors for processes in this group."
::= { processExcludedEntry 3 }
processExcludedField OBJECT-TYPE
SYNTAX ProcessMatchField
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ProcessEntry field used for grouping."
::= { processExcludedEntry 4 }
processExcludedMatch OBJECT-TYPE
SYNTAX ProcessMatchType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Pattern matching type."
::= { processExcludedEntry 5 }
processExcludedOK OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A flag indicating status of the group. It is true(1)
when the number of processes and the total amount of
resources used by them is within the configured
range and false(2) otherwise."
::= { processExcludedEntry 6 }
processExcludedMinCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum number of processes that should be
running. The OK flag is cleared if the number of
running processes falls below this minimum."
::= { processExcludedEntry 7 }
processExcludedMaxCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of processes that should be
running. Zero or negative number stands for
infinity. The OK flag is cleared if the number
of running processes becomes greater than the maximum."
::= { processExcludedEntry 8 }
processExcludedMaxVSZ OBJECT-TYPE
SYNTAX Gauge32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value of the virtual memory size the
excluded processes are allowed to use. The OK flag
is cleared if the actual virtual memory usage becomes
greater than this value."
::= { processExcludedEntry 9 }
processExcludedMaxRSS OBJECT-TYPE
SYNTAX Gauge32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum total value of the RSS for use by
this group. The OK flag is cleared if the actual
total RSS becomes greater than this value."
::= { processExcludedEntry 10 }
processExcludedMaxCPU OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value of intantaneous CPU usage (in
percent) allowed for this process group. The OK flag
is cleared if the actual usage becomes greater than
this value."
::= { processExcludedEntry 11 }
processExcludedCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of the running processes in this group."
::= { processExcludedEntry 12 }
processExcludedCPUMax OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum instantaneous CPU usage (percent)."
::= { processExcludedEntry 13 }
processExcludedCPUAvg OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average total CPU usage (percent)."
::= { processExcludedEntry 14 }
processExcludedCPUInst OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average instantaneous CPU usage (percent)."
::= { processExcludedEntry 15 }
processExcludedVSZ OBJECT-TYPE
SYNTAX Gauge32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total virtual memory size in bytes."
::= { processExcludedEntry 16 }
processExcludedRSS OBJECT-TYPE
SYNTAX Gauge32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum total value of the RSS for use by
this group. The OK flag is cleared if the actual
total RSS becomes greater than this value."
::= { processExcludedEntry 17 }
hostMemInfo OBJECT IDENTIFIER ::= { hostprocMIB 5 }
hostMemTotal OBJECT-TYPE
SYNTAX Gauge32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total usable RAM"
::= { hostMemInfo 1 }
hostMemAvailable OBJECT-TYPE
SYNTAX Gauge32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An estimate of how much memory is available for
starting new applications, without swapping."
::= { hostMemInfo 2 }
hostMemFree OBJECT-TYPE
SYNTAX Gauge32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total free RAM"
::= { hostMemInfo 3 }
hostSwapTotal OBJECT-TYPE
SYNTAX Gauge32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total amount of swap space available."
::= { hostMemInfo 4 }
hostSwapFree OBJECT-TYPE
SYNTAX Gauge32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amount of swap space that is currently unused."
::= { hostMemInfo 5 }
END
-- Local variables:
-- eval: (add-hook 'write-file-hooks 'time-stamp)
-- time-stamp-start: "\\(LAST-UPDATED\\|REVISION\\) *\""
-- time-stamp-end: "\""
-- time-stamp-format: "%:y%02m%02d%02H%02MZ"
-- time-stamp-line-limit: 32
-- time-stamp-count: 2
-- end:
Next: Copying This Manual, Previous: Bug reporting, Up: Top [Contents][Index]